This search combines search strings from the content search (i.e. "Full Text", "Author", "Title", "Abstract", or "Keywords") with "Article Type" and "Publication Date Range" using the AND operator.
Beilstein J. Nanotechnol. 2017, 8, 801–812, doi:10.3762/bjnano.8.83
Figure 1: Schematic illustrating the experimental system which includes a laser delivery system, precursor an...
Figure 2: Segment angle plotted as a function of dwell time per pixel grown under six different conditions: 1...
Figure 3: BF STEM images of a) an as-deposited EBID segment with a 10.4 ms dwell time per pixel and in situ L...
Figure 4: SEM images (scale bar length is 100 nm) of suspended nanowires grown across a ≈500 nm gap using a d...
Figure 5: COMSOL™ simulation results showing the preferential heating at of the EBID deposit. a) is a plot of...
Beilstein J. Nanotechnol. 2015, 6, 907–918, doi:10.3762/bjnano.6.94
Figure 1: In situ EDS spectra of deposits purified using an electron beam with an energy of 5 keV, a current ...
Figure 2: a) Cross-section SEM images of 400 nm thick PtCx deposits that were purified for 1, 2, 4, 6, 8, and...
Figure 3: Normalized carbon peak area plotted as a function of a) curing time for the indicated pixel resolut...
Figure 4: a) Normalized carbon peak area plotted as a function of dose for the beam energies shown. b) Monte ...
Figure 5: a) Images of wire deposits with different initial thicknesses (wires 1–4) purified at 1 min interva...
Figure 6: a) EDS measurements of the samples deposited and purified on the TEM membranes. TEM images of an b)...
Figure 7: Selected area electron diffraction (SAED) patterns for O2 E-beam uncured (left) and cured (right) d...
Figure 8: Bar graph comparing the simulated and experimental purification rates for varying beam parameters.
Beilstein J. Nanotechnol. 2015, 6, 462–471, doi:10.3762/bjnano.6.47
Figure 1: (a) Classification of proximal shapes (right hand side). The grey box indicates the intended deposi...
Figure 2: (a) Radius of the outer halo (AFM-based) of 30 keV PtC deposits as a function of the central pad th...
Figure 3: Representative AFM height image (a) of a 9 nm thick PtC deposit on Si–SiO2 fabricated at 25 keV tog...
Figure 4: AFM height images with overlaid current information of PtC pads deposited on an conductive Au elect...
Figure 5: (a) Functional classification of proximity deposition based on KFM measurements. (b) and (c) show t...
Figure 6: Edge-broadening effect for 30 keV deposits of different thickness. (a) shows a normalized height re...
Figure 7: Broadening effects for 5 keV deposits of different thickness. (b) shows the normalized height repre...
Figure 8: Outer-halo behavior for increasing pad thicknesses of 5 keV deposits (squares) together with an FSE...
Figure 9: (a) AFM height cross section of a 20 keV deposit. (b) cumulative BSE emission (blue, left axis) and...